AN UL LISTED COMPANY
manufacturer & exporter of : Steel pipe clamps, sanitary fittings & hardware items
Previous
Next
CLEVIS HANGER
A CLEVIS HANGER provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.
Sprinkler Hanger
A CLEVIS HANGER provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration
Hanging Clamp With EPDM Lining
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.
Hanging Clamp without Rubber
PIPE HANGER is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.
U Strap
A standard Pipe Strap is recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.
Rubber Support Inserts
Recommended to use at the supporting points of insulated pipes to prevent crushing of insulation. Dimensionally accurate as each piece is molded. It has excellent resistance to deterioration/ distortion. Steel reinforcement gives higher strength and load bearing capacity.
Heavy Saddle Clamp “U” Type
Recommended to use at the supporting a piping system of heavy weight with fittings vertically or horizontally to walls or ceilings. It can be used to mount electrical & insulated pipes, corner locking and better gripping of electrical conduits.
Half Saddle
Recommended for support of standard conduit, cable and steel pipe on walls or sides of beams. Not recommended for use horizontally on ceilings, bottoms of beams and similar installations since the factor of safety is greatly reduced when so used.
Beam Clamp
Beam clamps are devices that clamp onto a structural steel beam for support, lifting, and rigging applications. They connect components to the structural steel without drilling or welding, which could change the integrity of the materials.
Riser Clamp
Riser Clamp are ecommended for the support and /or restraint of vertical steel pipes. A Riser Clamp is designed to attach to the pipe and to rest on a structural member or floor. It is not designed to have a hanger rods attached to it to support the pipe.
Strut Clamp – Two Piece Channel Clip
Designed as a guide to permit longitudinal movement of pipe. Karishma Steel believes in latest technology so that we can beat our competitors and always won the race. Our back bone is always hungry for the new technology and updated operation process.
A Clamp
Recommended for support of pipe lines running at a definite distance from the wall or floor or a building or structure. Used where removing and installing of pipe is done periodically.
Nail Clamp
Recommended for vertical installation of steel, copper and PVC pipes. Suitable for installation without vibration control requirements.
Galvanized Hose Clamps
The strongest worm gear clamp in the world. The strongest worm-gear clamp made in the world today. Withstands more than 3 times the SAE torque requirements for Type F worm-gear clamps.
Galvanized G Clamp
G-cramp is a type of clamp device typically used to hold a wood or metal work piece, and often used in, but are not limited to, carpentry and welding.
U Bolt
U – Bolts are used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping.
U Bolt With Rubber Lining
U – Bolts with lining are used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping.
Chrome Plated Brass Sanitary Fittings-1
We are manufacturer and exporter of Chrome Plated Brass Sanitary fittings. Karishma Steel believes in latest technology so that we can beat our competitors and always won the race. Our back bone is always hungry for the new technology and updated operation process.
Chrome Plated Brass Sanitary Fittings-2
We are manufacturer and exporter of Chrome Plated Brass Sanitary fittings. Karishma Steel believes in latest technology so that we can beat our competitors and always won the race. Our back bone is always hungry for the new technology and updated operation process.
Screw for Bidet
We are well known for the manufacture of a high quality of Screw for Bidet/water heater/wash-basin which have been made using a superior quality of mild steel and the product is made as per the customer specification and requirements. The product has a fine finishing which is galvanized and we offer to our clients a wide range of products which are very durable and reliable. These products are very efficient and they have a robust build which gives them a long shelf life.
Screw for Water Heater
We are well known for the manufacture of a high quality of Screw for Bidet/water heater/wash-basin which have been made using a superior quality of mild steel and the product is made as per the customer specification and requirements. The product has a fine finishing which is galvanized and we offer to our clients a wide range of products which are very durable and reliable. These products are very efficient and they have a robust build which gives them a long shelf life.
Screw for Wash-Basin
We are well known for the manufacture of a high quality of Screw for Bidet/water heater/wash-basin which have been made using a superior quality of mild steel and the product is made as per the customer specification and requirements. The product has a fine finishing which is galvanized and we offer to our clients a wide range of products which are very durable and reliable. These products are very efficient and they have a robust build which gives them a long shelf life.
Accessory Series
We are well known for the manufacture of a high quality of Duct Corner Piece which have been made using a superior quality of mild steel and the product is made as per the customer specification and requirements. The product has a fine finishing which is galvanized and we offer to our clients a wide range of products which are very durable and reliable. These products are very efficient and they have a robust build which gives them a long shelf life.
G-Clamp
We are well known for the manufacture of a high quality of Duct G Clamp which have been made using a superior quality of mild steel and the product is made as per the customer specification and requirements. The product has a fine finishing which is galvanized and we offer to our clients a wide range of products which are very durable and reliable. These products are very efficient and they have a robust build which gives them a long shelf life.
Floor Drains
Whether indoors or outdoors, floor drains are designed to efficiently and safely direct water to a sewer or municipal storm drain so that the floor stays dry and rooms don’t flood. The purpose of traps is to prevent sewer odors and gasses from making their way through the drain and into your home.
Hex Bolts
Hex Head and Heavy Hex Head in Full and Partial Threading. Karishma Steel believes in latest technology so that we can beat our competitors and always won the race. Our back bone is always hungry for the new technology and updated operation process.
Allen Bolt Screw
Allen Bolt Screw and Heavy Hex Head in Full and Partial Threading. Karishma Steel believes in latest technology so that we can beat our competitors and always won the race. Our back bone is always hungry for the new technology and updated operation process.
Nuts
Standard Hex Nuts, Heavy Hex Nut, Hex Coupling Nut, Nylon Lock Nut, Spring Nut, Dome Nut and Wing Nut. We are the best satisfactory service in the world. Our key of success is We deliver on time what we said and the best part of our relationship key is we want repeat order from our clients.
Washers
Threaded rods featuring a white color code are the strongest. The second-strongest color code is red, which is made of A4 stainless steel. The third-strongest color code for threaded fasteners is green, which is made of A2 stainless steel. Coming in fourth and five is yellow and unmarked, respectively.
GI Threaded Rod
Plain Washers, Spring Lock Washers and Hardened Steel Washers. Karishma Steel believes in latest technology so that we can beat our competitors and always won the race. Our back bone is always hungry for the new technology and updated operation process.
Threaded Bars
Threaded rods featuring a white color code are the strongest. The second-strongest color code is red, which is made of A4 stainless steel. The third-strongest color code for threaded fasteners is green, which is made of A2 stainless steel. Coming in fourth and five is yellow and unmarked, respectively.
Drop in Anchor
Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete. … A setting tool is required to set the anchor in the concrete.
Fix Bolt
Fixings (or fasteners) are used to hold things together or to attach them to the surfaces such as walls, floors or roof. They are a form of connector and play an indispensable role in construction. Choosing the right fixing for the particular job is important.
Karishma Steel is an ISO 9001:2015 Certified Company. We are Manufacturer & Exporter of : Steel Pipe Clamps, Sanitary Fittings & Hardware Items
Important Links
Contact Now
- +91-0129-4179330
- +91-9891279330
- karishmasteel@gmail.com
- sales@karishmasteels.com
- info@karishmasteels.com
- Plot No : 182, Opp. Escorts Herion, Mujessar, Sec -24, N.I.T. Faridabad (Haryana), INDIA